Skip to main content
Skip table of contents

Barcoding

Guides: Motorola MT 2090

Motorola MT2090

Download PDF

These steps are taken from various pages from the PDF manual

  1. Unplug power from cradle until step 7

  2. Unplug USB cable from cradle to computer until step 5

  3. Pull battery from scanner until step 8

  4. Reboot computer and then login

  5. Plug USB cable from cradle to a different port on computer

  6. Wait a few moments and verify that the light on the cradle is lit

  7. Reconnect the power plug to the cradle

  8. Put battery back into scanner and wait for it to reboot

  9. Select "Scan Item" from scanner menu

  10. Scan pairing barcode on cradle and wait for bluetooth symbol on screen to turn green

  11. Scan "*Enable Parameter Bar Code Scanning"
    (page number 5-7, printed page 201)

  12. Scan "Scan Suffix 1"
    (page 5-19, printed page 213)

  13. Scan "7" followed by "0" followed by "1" followed by "3"
    (Appendix D & D-2, printed pages 545 & 546)

  14. Scan " "
    (page number 5-20, printed page 214)

  15. Scan "Disable Parameter Bar Code Scanning"
    (page number 5-7, printed page 201)

  16. Test scanning in notepad
    (barcode appears in notepad after scanning and appears below barcode)

  17. Test scanning in R2

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.